Transfer steel aluminum hot coil mold in outdoor use should be waterproof treatment

The transfer steel aluminum hot coil mold is suitable for a variety of occasions, and is not limited by the weather when used indoors, but needs to pay attention to the influence of some external environment when used outdoors. 

Outdoor use of transfer steel aluminum hot coil mold rain and snow weather has a greater impact, should pay attention to the use of safety. If the rain and snow are large, it is recommended to suspend the use of the transfer steel aluminum hot coil mold, especially the battery-powered transfer steel aluminum hot coil mold. The rainwater can easily penetrate the battery box and cause the battery to be short-circuited or cause an explosion. The transfer steel aluminum hot coil mold that is powered by low-voltage rails outdoors is used when it rains, because the track itself has 36v low-voltage electricity, which basically does not affect the use when it rains, and the pole between the two tracks when the rain is large. It is easy to short-circuit, because the electric part has a short-circuit self-breaking protection system, so it can not be used when the rain is large.

Therefore, it is necessary to pay attention to waterproofing when using the transfer steel aluminum hot coil mold outdoors. If it is raining, choose whether to use the tram according to the rain; if it is snowy, then it is necessary to timely remove the snow from the transfer steel aluminum hot coil mold. A short circuit fault has occurred on the flat car. Since the transfer steel aluminum hot coil mold uses a battery, the battery will have a reduced service life due to water ingress, dampness, etc., so it is necessary to waterproof and damp the battery for the life of the battery.

In order to prolong the service life of the transfer steel aluminum hot coil mold, it should be minimized in rain and snow weather. Rainwater invades the flat car body, which will cause rust to cause the patent leather to fall off, which will shorten the service life of the transfer steel aluminum hot coil mold.