A brief analysis of the turning radius of Perfect electric flat carriage
2018-05-08
A brief analysis of the turning radius of Perfect electric flat carriage
There are two kinds of Rail Flat Cart produced by Henan Perfect handling equipment Co., Ltd. One is electric flat carriage, and the other is trackless electric flat trailer. The turning mechanism and turning method of these two Track Laying Flat Car are different, so the turning radius is different.
Electric rail flat car: The electric flat carriage is a electric flat car. The electric flat carriage can turn in the following several kinds of orbit, such as: s orbit, annular orbit, C shape orbit, etc. The turning principle is: on the basis of straight track car, each wheel is equipped with independent steering mechanism and turning mechanism, not limited by load. The turning radius is related to the track gauge and the front and rear wheel distance, so the turning radius of the rail electric flat plate car is determined by the size of the platform of the flat car and the gauge of the track. But the electric flat carriage is not that the smaller the table, the smaller the turn. Bending radius, sometimes when the size of the table is too small, will cause the turning mechanism and the driving system can not be put down, so the size of the table to meet the needs of production, as far as possible to meet the requirements of the customer.
Non motor transfer cart: a electric flat carriage that walks on the ground and does not have to lay a track. The electric flat carriage takes mechanical turns and turns while walking. The electric flat carriage can make 360-degree turns, and the turning radius of the trackless electric flat car is close to its length.
The two kinds of heavy duty flat car have their own turning radius and their function and performance.
