Electric transfer cart is a kind of electric vehicle.It's also called the track transfer carriage, the transfer trolley, the cross bogie, the flat car.Due to the widespread and extremely high utilization rate of electric flat vehicles, the frequency of its failure increases accordingly. Henan Perfect Handling Equipment Co., Ltd concluded that the most common failures of electric transfer cart are as follows:

 

1,No power source display: 

 

1.1,No power: whether the electrical system can power the electric car power supply, generally used test pencil test can be known.

 

1.2,Low voltage: low voltage than the rated voltage of the electric transfer cart more than 10%, electric transfer cart starting torque is too small, make electric transfer cart cannot exercise, at this point can be measured with a multimeter, electric transfer cart voltage of the input to exclude.

 

2,Electric flat car temperature is too high:

 

2.1,Overload use: overload causes electric flat car to burn and burn electric flat car, so the flat load must be used within the rated load range.

 

2.2,Damage to electric flat bearing: replace electric flat bearing.

 

2.3,Failure to work according to the work: should strictly follow the electric car working system.

 

3,When carrying heavy objects, it cannot be started after parking:

 

3.1,The system voltage is too low or fluctuate too much: should wait for electric car voltage to return to normal before starting.

 

3.2,Lack of phase number: check the number of phase.

 

4.Electric flat noise failure:

 

4.1,Electrical control box failure: the current should be replaced or re-reinforced if the current connector fails or the part of the contact is aging.

 

4.2,Failure of electric gear: stop the machine, check whether there is any abnormality in the operation of electric drive gear, whether there is damage to the outer surface of the tooth, whether the center shaft is off position, etc.Electric flat cars are not available when the gear failure is not handled.

 

4.3,Speed reducer failure: first of all to close the machine and check machine have internal contact roller skating oil, such as lack of lubricating oil black or presentation you will need to replace or refueling, appear such circumstance for a long time will make the gear tooth surface and excessive wear and damage.

 

In short, after the electric flat car broke down, we need to treat the disease, find the crux of the problem, and then deal with it.Our company with reliable product quality and excellent after-sales service, wholeheartedly for all circles user service, please the general customers to inquire.

 

Website Address: http://www.chinarailcart.com