The attention of battery electric transfer cart to add electrolyte
2017-12-29
There are four points to be noticed when adding electrolyte or water to battery electric transfer cart:
1. The electrolyte is 10 to 15 millimeters high above the plate;A battery with two red lines must not exceed the upper red line.
2. The electrolyte will overflow from the hole in the battery cover.The electrolyte conducts electricity, and once it flows to the positive and negative sides of the battery, it will form a self-discharging loop.The electrolyte should be erased or washed with boiling water.
3. When adding electrolyte, if something is accidentally dropped in, you must not use metal to remove the impurities.If you use wire or copper wire to scoop up, the metal molecules will enter the battery to form the self-discharge from the corrosion of sulfuric acid, and damage the battery.
4. In the process of charging and discharging, the water in the electrolyte will gradually decrease due to electrolysis and evaporation, causing the electrolyte surface to decrease.If not timely supplement, it is possible to shorten the service life of the battery, should supplement the distilled water in time, and do not drink pure water instead.Because pure water contains a variety of trace elements, can cause adverse effect to accumulator.
