The traction motor suspension of low-pressure transfer cart
2017-12-25
The BDGZ electric transfer cart is a new type of vehicle, which is a kind of BDG of low-pressure track power electric transfer cart, and BDGZ electric transfer cart, the most important of which is the traction motor.In simple terms, a motor is used to drive a motor or a few moving shafts on a locomotive or moving car.General traction motor has two kinds of suspension.
The first type is the suspension of traction motor and dynamic axle connection.When using this type of suspension, the impact vibration of the moving wheel through the rail joint and the bifurcation will be transmitted directly to the traction motor.The axle suspension is suitable for locomotive vehicles with a structural speed of less than 120 km/h.
The second type is suspension or suspension.Using this way of hanging fixed suspended on the bogie frame, traction motor in traction motor shaft end and join all kinds of elastic connection between small and big gear components, to reduce the influence of impact vibration.Suspension suspension applies to locomotive vehicles with a structure speed of more than 120 km/h.
Electric transfer cart factory actually tell you the working principle of traction motor and dc motor, but have a special working conditions: the space size is limited by track and wheel diameter, so you can remember that on one hand.
