Today, Henan PERFECT Handling Equipment Co.,Ltd. One of the transfer wagon manufacturers, will analyze the runaway speed of transfer wagon pulley.

 

1.Electric pulley skid;

 

1.1 The friction coefficient of the pulley has been reduced due to the long use of the pulley, and the belt is too smooth and skidded. This situation must change the belt.

 

1.2 In the process of installation, the transfer wagon pulley without positioning fixture, or positioning fixture failure, lead to the belt in the operation process to loosen, check the positioning fixed components.

 

2.The speed of the electric pulley is out of control;

 

2.1 Electric pulley speed too fast or too slow, this is the main reason is that the inside of the transfer wagon roller motor malfunction, lead could be a step-down circuit burn out too, too slow is part of the damping resistance failure cause, check the circuit of transfer wagon roller motor control system.

 

2.2 When the pulley of electric carriage pulley is not turned, this is usually caused by the unstable inlet voltage of electric car, and check whether the voltage input system is faulty.

 

The above is the analysis of the rotation speed control of the transfer wagont pulley for our company, and more about transfer wagon consultation, please continue to pay attention to the official website http://www.chinarailcart.com