How do we find the reason of the transfer cart motor does not turn?
2017-12-26
The most important part of a battery powered transfer cart is the motor.After running for a period of time, there may be some minor glitches, and the motor is the least efficient when it does not turn. How do we find the reason the motor of the transfer cart does not turn?
1. Test the motor lead with the battery powered transfer cart detector for the voltage, and immediately determine the fault of the line and control line.The measurement result is a voltage, and the fault of the motor or the motor is ruled out.The measurement results are not voltage, and the control line is faulty and should be checked next.
2. Measure the contact point of the battery box, and immediately determine the failure of the vehicle due to the power supply.If there is no voltage display, turn on the power supply lock, and the dashboard indicator light is not bright, then judge: the fuse of the fuse is broken, the fuse should be replaced, the wire should fall off, the wire should be broken or the new line should be replaced.If there is a voltage display, turn on the power lock, the dashboard indicator light is not on, then the power lock is broken and the new lock can be replaced.
3. Disconnect the brake plug of the electric flat controller and turn the switch.When the car turns, it is determined that the brake switch is broken and has caused a short circuit fault and should be replaced with a new brake switch.If the car does not turn, then use a good speed adjustment, replace the original.If the car turns, it is decided that the original speed adjustment is bad, cause the electric car not to turn, should change the new controller.
These are some of the small methods introduced by china transfer cart on rail suppliers Henan PERFECT Handling Equipment Co.,Ltd. I hope that you can be used and pay more attention to the situation of battery powered transfer cart, which is conducive to the normal operation of the work.
