How choose the cable reel of the industry use rail flat vehicle
2019-05-07How Choose The Cable Reel Of The Industry Use Rail Flat Vehicle
On industry use rail flat vehicle,each manufacturer uses a narrower winding reel that is about six times the width of the cable.In this case,if the cable carrier is sufficiently spaced from the winding spool shaft,it is not necessary to use a cable arranging device,and the surface of the reel reel is guided by the first layer of spiral lining.Although there is no control of the cable arranging device at the time of winding,since the distance from the introduction roller is large and the introduction angle is small,the subsequent layers of cables can be arranged one by one.
The large industry use rail flat vehicle has a long transport distance and a large input power,and a power supply cable with a large cross section and a large diameter is used.This type of electric scraper must be equipped with a wide reel and cable arranging device.The cable reel is arranged with a single support and a double support,and the drive shaft has a single shaft and a double shaft,etc.,and the force is determined by the structure.The winding radius is an important parameter in the overall design of the industry use rail flat vehicle.The space position on the industry use rail flat vehicle and the design of the power unit should be considered.Another part of the design of the reel is the transmission of electrical energy through which the electrical energy is transmitted to the vehicle body
