What are the requirements for heavy duty rail transfer carriage?
2020-05-22What are the requirements for heavy duty rail transfer carriage?
For the heavy duty rail transfer carriage turning less than 40 degrees, it can be set to adopt the form of track switches. Once the turning angle is greater than 40 degrees, it is necessary to set a turntable turning mechanism at the turning point. The specific requirements are as follows:
Turning of heavy duty rail transfer carriage:
1. Ensure the smoothness of the track without foreign objects.
2. The goods to be transported should be placed evenly, and cannot be placed in one direction. In addition, it must not be overloaded.
3. There is a control box on the ground. There are left-hand, right-hand, jog and stop buttons on the control box, and corresponding indicator lights are provided.
4. All exposed processing surfaces shall be treated with anti-rust. The surface is coated with anti-rust primer, dark gray topcoat, the guide rail is not painted.
5. The track docking frequency converter realizes automatic deceleration control, and an electronically controlled safety limit device is provided between the positions to ensure accurate positioning when the rotating table rotates, so that the main body rail is well aligned with the ground track; there is an auxiliary under the rotating table Support wheel set to ensure the safety and stability of the rotating table.
