Track laying of electric rail material transfer cart for Workshop
2018-05-22
For electric rail material transfer cart, must be inseparable from the track, if the electric rail material transfer cart to run well, track laying is a key, for the ordinary track (do not need to do insulation treatment, track laying requirements are not very high, But the parallelism of the two orbits is higher, which ensures that electric rail material transfer cart runs on the orbit The four wheels of the trolley electric rail material transfer cart are in contact with the rail at the same time to ensure the wheel - wheel pressure of the electric rail material transfer cart and the non - deformation of the electric rail material transfer cart . Generally , the track is laid , and the tread surface of the rail is 20 mm higher than the horizontal plane , leaving the wheel along the groove .
For the laying of insulated track, electric rail material transfer cart is necessary to do insulation treatment on the basis of the requirements of ordinary track, and all accessories for rails such as bolts and pressure plates need to be insulated, and the parallelism of laying insulating track is higher than that of ordinary track. Because the electric rail material transfer cart wheel needs to be charged on the track, if the electric rail material transfer cart wheel doesn't Contact with the orbit, that is, the electric rail material transfer cart itself does not have electricity, in which case the electric rail material transfer cart will not work so well. So for insulation track, it is best to find professional personnel to lay, so as to ensure that the late operation of electric rail material transfer cart good.
