Operating rules for electric flatbed rail trolley

The electric flatbed rail trolley can meet the placement and transportation of various goods, because the plan of the vehicle is flat, which does not limit the placement of goods, and guarantees that the goods will not be destroyed. Moreover, the height of the table top of the device is relatively low, so that the loading and unloading of heavy objects is more and more simple, and the use of the electric flatbed rail trolley brings us a lot of convenience, and then I introduce the operation rules of the device.

Henan Perfect electric flatbed rail trolley has a simple structure, strong carrying capacity, low failure rate, and convenient protection and maintenance. The power source can use battery or industrial power supply without any pollution to the surrounding environment.

Henan Perfect electric flatbed rail trolley is a battery-powered, motor-driven transport tool for pulling goods or pulling people; electric power is an important power for environmental protection, cleaning, high conversion rate, and is driven by electricity. The upgrading of transportation vehicles will speed up the development of low-carbon transportation for transportation and transportation, reduce transportation costs, save power and protect the environment. In the balanced charging, the voltage, density and temperature of each battery of the electric flatbed rail trolley are measured and recorded; before the charging is completed, the density and liquid level of the electrolyte should be adjusted to meet the rules. In the balanced charging, the voltage, density and temperature of each battery of the electric flatbed rail trolley is measured and recorded; before the charging is completed, the density and liquid level of the electrolyte should be adjusted to meet the rules.

1. The operator understands the function of the electric flatbed rail trolley structure, and can obtain independent operation after passing the test.

2. The operator should carefully do "three good" (management, use, repair) "four meetings" (will use, will maintain, will check, will eliminate the fault).

3. The operator follows the “five disciplines” of the equipment and the “four requirements” of the protection equipment.

4. The operator should check the equipment at any time in accordance with the requirements of “Rolling Inspection Contents”.

5. In strict accordance with the equipment lubrication chart rules to refuel, to achieve "five fixed" (timed, fixed point, quantitative, qualitative, fixed), after the oil should be covered with the lid of the oil cup (pool).

6. To stop the use of ultra-standard, overload equipment.

7. When transporting heavy objects, it should be placed smoothly and gently to ensure uniform distribution of components and stop the emphasis.

8. Before starting the equipment, first announce the signal, check the movement direction, no obstacles, no obstacles can be activated, start and stop smoothly, do not touch the end of the iron.

9. When the switch cannot be driven, it should be checked immediately to prevent the motor from being burnt or causing other accidents.
10. When changing the direction of movement, wait until the movement stops in full and then reverse.

11. Always check the operation of each department. If it is found that the motor or bearing temperature rises or the noise is abnormal, stop it immediately.