Transfer flat carriage battery winter maintenance method
2019-08-29Transfer flat carriage battery winter maintenance method
The maintenance of the battery is very different, which directly affects the use of the transfer flat carriage, so pay attention to the maintenance of it. Be sure to pay attention to the purchase of battery replenishment on the market, do not buy electrolyte, this is two concepts, pay attention when adding replenishing liquid: transfer flat carriage battery has a liquid surface mark on its outer casing, there are two horizontal lines, the top The line is: the maximum liquid level cannot exceed
For this line, the lower line is: Replenishment should be added below this line. Generally, the liquid level of the electrolyte is kept at a distance of 5 - 8 cm from the electrode plate. Battery
It is described as a power station for transfer flat carriage. The life of the transfer flat carriage battery is generally about 2-3 years, if used and maintained properly,
Can be used for more than 4 years. If used and maintained improperly, it will be damaged early in a few months.
The battery of transfer flat carriage should check the height of the electrolyte regularly during use, and check the storage condition of the electric flat battery in time.
supplement. Transfer flat carriage battery maintenance work is relatively simple, do a good job of electrolyte supplement, transfer flat carriage battery and pole pile cleaning and electric flat
The work of controlling the specific gravity of the vehicle battery can effectively extend the service life of the electric flat battery.
Battery maintenance is very important for the transfer flat carriage. Let's talk about the maintenance of the battery:
1. The connection of the battery must be kept in good contact to avoid sparks causing the pole to burn out or the battery to explode.
2. No harmful substances are allowed to fall into the battery. Instruments and utensils for measuring electrolyte density, temperature and liquid level should be kept clean to avoid
Bring impurities into the battery.
3. The battery should avoid overcharging, overdischarging, strong charging and insufficient charging, otherwise the battery life will be shortened.
4. The surface, connecting wires and bolts of the battery should be kept clean and dry. If there is an acid solution, wipe it off with a cotton solution and then use it.
Rinse with water and dry. During the cleaning process, the alkali solution is never allowed to enter the battery.
5. Do not place any conductive objects on the battery cover to avoid short circuit of the battery.
6. After the battery is discharged, it should be charged in time. The maximum interval should not exceed 24 hours.
7. The charging room is strictly prohibited from fireworks to avoid hydrogen explosion accidents. The charging room should have good ventilation and the room temperature should not be lower than 15 °C.
8. When the battery is in use, there will often be imbalances in voltage, density and capacity. In order to achieve a balanced and consistent battery in use
In a good state, the battery should be charged once a month.
9. When the flatbed battery is in use, if there is a backward battery, the cause should be identified in time and repaired immediately. If it cannot be repaired, it should be replaced with a new one.
battery.
10, water and sulfuric acid solution injected into the battery, the temperature should be between 10 ~ 35 ° C, should not be too high or too low.











